Showing posts with label Phosphorus. Show all posts
Showing posts with label Phosphorus. Show all posts

Friday, 25 November 2016

Phosphorus removal from wastewater using mussel shell: Investigation on retention mechanisms

Ecological Engineering, 97, 2016, 558–566
http://dx.doi.org/10.1016/j.ecoleng.2016.10.066


Mussel shell is a carbonate-rich by-product that could be recycled in wastewater treatment. In this work, phosphorus removal from aqueous solutions was obtained in a series of batch and column experiments in the laboratory, using a calcined and a finely-ground (non-calcined) mussel shell. Phosphorus removal followed a Freundlich model at high contact times (72 h) and a Langmuir model at lower time (24 h). Phosphorus removal capacity increased with contact time and with P concentration in the solution, while desorption of the retained P was very low (<4%). Calcined mussel shell presented a higher retention capacity than the fine shell, which can be attributed to differences in mineralogy and composition. The process of P removal from aqueous solution showed features that are typical of chemical reactions rather than denoting adsorption; concretely, the percentage of P removed increased with initial P concentration in the solution, thus pointing at a relevant role of precipitation in P removal. The results corresponding to the fractionation of the P retained in the mussel shell after the experiments showed that both mechanisms, adsorption and precipitation, contributed to P removal.

Tuesday, 6 September 2016

Phosphorus retention on forest and vineyard soil samples, mussel shell, pine-sawdust, and on pyritic, granitic and waste materials

Geoderma, 280 (2016) 8–13


Focusing on P, we used batch-type experiments to study P retention on various materials: a forest soil sample, a vineyard soil sample, finely and coarsely ground mussel shell, pine-sawdust, pyritic material, granitic material, mussel shell calcination ash, slate processing fines, and three different mixtures that included three components: sewage sludge, mussel shell ash, and calcined mussel shell or pine wood ash. The pyritic material and the mussel shell ash showed the highest P retention capacity, reaching > 95%. The lowest P retention (< 60%) corresponded to the pine-sawdust and slate processing fines. Data fitted satisfactorily to the Freundlich model, unless in the case of pine-sawdust and slate fines; however, only forest and vineyard soil samples can be satisfactorily adjusted to the Langmuir model. These results could be useful to program appropriate management practices, especially when focusing on controlling P concentrations in different environmental compartments, as well as to correctly recycle the by-products and waste materials assayed.

Wednesday, 9 December 2015

As(V) and P Competitive Sorption on Soils, By-Products and Waste Materials

Int. J. Environ. Res. Public Health 2015, 12(12), 15706-15715
doi:10.3390/ijerph121215016


Batch-type experiments were used to study competitive As(V) and P sorption on various soils and sorbent materials. The materials assayed were a forest soil, a vineyard soil, pyritic material, granitic material, coarsely and finely ground mussel shell, calcinated mussel shell ash, pine sawdust and slate processing fines. Competition between As(V) and P was pronounced in the case of both soils, granitic material, slate fines, both shells and pine sawdust, showing more affinity for P. Contrary, the pyritic material and mussel shell ash showed high and similar affinity for As(V) and P. These results could be useful to make a correct use of the soils and materials assayed when focusing on As and P removal in solid or liquid media, in circumstances where both pollutants may compete for sorption sites.