Valorization of biosorbent obtained from a forestry waste: Competitive adsorption, desorption and transport of Cd, Cu, Ni, Pb and Zn

Ecotoxicology and Environmental Safety, 131(2016) 118–126

http://dx.doi.org/10.1016/j.ecoenv.2016.05.007

Bark from Pinus pinaster is one of the most abundant forestry wastes in Europe, and among the proposed technologies for its reutilization, the removal of heavy metals from wastewater has been gaining increasing attention. In this work, we have studied the performance of pine bark for heavy metal biosorption on competitive systems. Pb, Cu, Ni, Zn and Cd sorption and desorption at equilibrium were studied in batch experiments, whereas transport was studied in column experiments. Batch experiments were performed adding simultaneously different concentrations (0.08–3.15 mM) of two or more metals in solution to pine bark samples. Column experiments were performed with 10 mM solutions of two metals or a 5 mM solution of the five metals. In general, the results under competitive conditions were different to those obtained in monoelemental experiments. The multi-metal batch experiments showed the adsorption sequence Pb≈Cu>Cd>Zn>Ni for lower metal doses, Pb>Cu>Cd>Zn>Ni for intermediate doses, and Pb>Cu>Cd≈Zn≈Ni for high metal doses. Desorption followed the sequence Pb<Cd<Cu<Zn<Ni for the lowest metal doses, and Pb<Cu<Zn<Cd<Ni for the highest ones. The bi-metal batch experiments indicated that Cu and Pb suffered the highest retention, with high capacity to displace Cd, Ni and Zn from adsorption sites on pine bark. The transport experiments produced comparable results to those obtained in the batch experiments, with pine bark retention capacity following the sequence Pb>Cu>Zn>Cd>Ni. The presence of a second metal affected the transport of all the elements studied except Pb, and confirmed the strong influence of Pb and Cu on the retention of the other metals. These results can help to appropriately design decontamination systems using this forestry waste.

As (V)/Cr (VI) pollution control in soils, hemp waste, and other by-products: competitive sorption trials

Environmental Science and Pollution Research

DOI: 10.1007/s11356-016-7108-0

We study As(V)/Cr(VI) competitive sorption on a forest soil, a vineyard soil, pyritic material, mussel shell, pine bark, oak ash, and hemp waste, adding variable As(V) and Cr(VI) concentrations or displacing each pollutant with the same concentration of the other. When using variable concentrations, As(V) showed more affinity than Cr(VI) for sorption sites on most materials (sorption up to >84 % on oak ash and pyritic material). The only exception was pine bark, with clearly higher Cr(VI) sorption (>90 %) for any Cr(VI)/As(V) concentration added. Regarding the displacement experiments, when As(V) was added and reached sorption equilibrium, the subsequent addition of equal Cr(VI) concentration did not cause relevant As displacement from oak ash and pyritic material, indicating strong As bindings, and/or low competitive effects. When Cr(VI) was added and reached sorption equilibrium, the subsequent addition of equal As(V) concentration caused Cr(VI) displacement from all materials except pine bark, indicating weak Cr bindings. In view of these results, oak ash and the pyritic material could be used to remove As(V) in concentrations as high as 6 mmol L−1, even in the presence of a wide range of Cr(VI) concentrations, whereas pine bark could be used to remove Cr(VI) concentrations as high as 6 mmol L−1. The other materials assayed (including hemp waste, studied for the first time as As(V) and Cr(VI) bio-sorbent) cannot be considered appropriate to remove As(V) and/or Cr(VI) from polluted media.